Part Number Hot Search : 
D6433 F0515 HC5515 C6074C NE5090N HC257 S3C80B8 HFA1150
Product Description
Full Text Search
 

To Download PDM60US12 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 AC-DC
60 Watts PDM60 Series
* * * * * * *
xppower.com
Medical & Industrial/IT Approvals 4000 VAC Isolation Class II Construction Single Outputs from 12 V to 48 V High Efficiency Non-standard Connectors Available Operation to +60 C
Specification
Input
Input Voltage Input Frequency Input Current Inrush Current Power Factor Input Protection * * * * 85-264 VAC 47-63 Hz 1.5 A rms max at 85 VAC 30/60 A max at 115/230 VAC cold start at +25 C * Compliant with EN61000-3-2 Class A equipment * Internal fuse in live line
General
Efficiency Isolation Switching Frequency Power Density MTBF * * * * * 80% typical 4000 VAC Input to Output 55 kHz typical 2.7 W/in3 >420 kHrs per MIL-HDBK-217F, +40 C ground benign
Environmental
Operating Temperature * -10 C to +60 C, derate above +40 C by 2.5%/C to 50% load at +60 C Operating Humidity * 5-95% RH, non-condensing Storage Temperature * -20 C to +85 C Operating Altitude * 3000 m max Shock * 30 g pk, half sine, 6 axes Vibration * 2 g, 5-500 Hz, 3 axes
Output
Output Voltage Initial Set Accuracy Minimum Load Start Up Delay Start Up Rise Time Hold Up Time Drift Line Regulation Load Regulation Transient Response * * * * * * * * * * See table 1% at 50% load No minimum load required <500 ms 40 ms typical 12 ms min at 115 VAC & 100% load <0.2% after 20 minute warm up 0.5% 3% 4% max. deviation, recovery to within 1% in 500 s for a 25% load change at 1 A/s 1% pk-pk, 20 MHz BW (see note 2) 115-150%, recycle input to reset 120-170%, auto recovery Trip and restart (Hiccup mode) indefinite 0.05%/C
EMC & Safety
Emissions * EN55022, level B conducted EN55022, level B radiated, EN60601-1-2, EN61204-3, FCC 20780 level B * EN61000-3-2, class A * EN61000-3-3 * EN61000-4-2, level 3 Perf Criteria A * EN61000-4-3, 10 V/m, 80% mod Perf Criteria A * EN61000-4-4, level 3 Perf Criteria A * EN61000-4-5, level 3 Perf Criteria A * EN61000-4-6, 10 Vrms, 80% mod Perf Criteria A * EN61000-4-11, 70% UT 10 ms, 40% UT 100 ms, <5% UT 5000 ms Perf Criteria A, B, B * EN60601-1-1, UL60601-1-1:2003, CSA60601-1, EN60950-1:2001, UL/cUL60950, CE Mark, CCC Mark
Ripple & Noise Overvoltage Protection Overload Protection Short Circuit Protection Temperature Coefficient
* * * * *
Harmonic Currents Voltage Flicker ESD Immunity Radiated Immunity EFT/Burst Surge Conducted Immunity Dips & Interruptions
Safety Approvals
AC-DC
Models and Ratings
Output Power 55 W 60 W 60 W 60 W 60 W 60 W 60 W Notes
1. IEC320-C18 input connector fitted as standard. For IEC320-C8 input connector add suffix `-C8' to model number. 2. Measured at output connector, decoupled by 0.47 F capacitor.
PDM60
Output Voltage 12 V 15 V 18 V 24 V 30 V 36 V 48 V Output Current 4.60 A 4.00 A 3.30 A 2.50 A 2.00 A 1.70 A 1.25 A Model Number(1) PDM60US12 PDM60US15 PDM60US18 PDM60US24 PDM60US30 PDM60US36 PDM60US48
Mechanical Details
1.61 (41.0)
AC INPUT IEC 320-C18 INLET
5.31 (135.0)
2.56 (65.0)
LED AC INPUT IEC 320-C8 INLET
2.750.20 (70.05.0) CORE
0.370.01 (9.50.3)
o0.10 (o2.5) o0.22 (o5.5)
DC OUTPUT POLARITY
Notes
1. 2. 3. 4. Dimensions shown in inches (mm). Tolerance specified is 0.04 (1.0). Cable length is 72" (1830mm) approx. Weight 1.28 lbs (580 g).
Derating Curve
100 Load (%) 80 60 40 20 0 -10
0
10
20
30
40
50
60
70
Ambient Temp (C)
17-Apr-07


▲Up To Search▲   

 
Price & Availability of PDM60US12

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X